3D Printed Compact Wallet

Slick minimalist wallet that fits your pocket seamlessly. You will need 24mm fabric elastic band. Money Strap = 80 to 95mm x 24mm fabric elastic band. Side and Bottom Straps = 40mm by 24mm fabric elastic band. Straps are sewed to the clips using the holes closes to the center of the wallet body when fitted. If you prefer you can also sew the second strip of holes which will have a stronger hold and less elasticity due to reduced travel. The strap will clip into the body. No need for glue. Warning: If you test fit the clips after printing you may have a hard time getting them out. In case you need to remove them use a pair of pliers to gently squeeze the clip hooks together and then use a large flat nose screw driver and twist the head in between the body and the clip and it should come out. Or simply use pliers to break the clip hooks by squeezing hard and print a new one. Approx 9 mins per clip. More details on thingyverse including the stl files. https://www.thingiverse.com/thing:4715152