533 Tiny Trainer is even better with HDZero | PART 1

Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST: https://www.fpvknowitall.com/ultimate-fpv-shopping-list SUPPORT ME ON PATREON at: http://bit.ly/2Ep5Sia THIS IS MY FULL TIME JOB. Here are other ways that you can support me: https://www.fpvknowitall.com/support-me/ --- I receive a commission (at no extra cost to you) if you make a purchase after clicking one of the affiliate links below. Buy the 533 Tiny Trainer FPV Crate "solderless" edition at: * FPV Crate - https://bit.ly/3xw61fr --- 0:00 - Let's build an HDZero Tiny Trainer 1:04 - What makes the FPVCrate Tiny Trainer different? 2:23 - Mount the FC to the bottom plate and install the motors 4:38 - De-solder the cam and vTX wires (since we're using HDZero) https://youtu.be/GoPT69y98pY - My soldering tutorial 5:31 - Receiver solder bridge and plug 6:18 - Solder HDzero vTX wires and connect to FC plug https://youtu.be/ujYq5HQ6kJQ - Omnifixo 3rd hand review 8:11 - Solder and mount the receiver 10:39 - Mount the HDZero vTX 12:52 - Install standoffs and mount battery holder 14:17 - Install 3d printed RX holder and antenna holder 17:04 - Install camera mount and camera 19:01 - Next up: configure the FC! https://www.youtube.com/watch?v=v0gbLQM97Fs - HDZero is almost ready to replace analog! Part 2 of this video - https://www.youtube.com/watch?v=li5MwZvsj4g