6 JetKVMs, 1 Rack – The Ultimate Setup!

I wanted to rackmount 6 JetKVMs in my server rack, thankfully there's a DIY solution for it. Merch Shop 🛍️: https://l.technotim.live/shop Thanks to JaredC01 for the designs! https://github.com/JaredC01 - LabStack-Rack Designs: https://github.com/JaredC01/LabStack-Rack - JetKVM: https://jetkvm.com (provided most of the JetKVMs however no input into this video) Other Products I used (affiliate links below) - M2 x 16mm Screws: https://amzn.to/3DxNZia - M3 x 8mm Screws: https://amzn.to/3XJxq9N - M3x4x5mm Threaded Inserts with tip: https://amzn.to/41C1NA8 - PoE Splitter: https://amzn.to/41pxKeU - 10 ft. USB-A cables: https://amzn.to/3FsA9hu - USB A to USB C adapters: https://amzn.to/4kGfZAL - 10 ft. Cat6 cables: https://amzn.to/4iCoScL - Female HDMI to HDMI coupler: https://amzn.to/41TbDij - Mini HDMI to HDMI (I didn't end up using these): https://amzn.to/3Fjs12U Video Notes: https://technotim.live Support me on Patreon: https://www.patreon.com/technotim Sponsor me on GitHub: https://github.com/sponsors/timothystewart6 Subscribe on Twitch: https://www.twitch.tv/technotim Gear Recommendations: https://l.technotim.live/gear Get Help in Our Discord Community: https://l.technotim.live/discord Main channel: https://www.youtube.com/@TechnoTim Talks Channel: https://www.youtube.com/@TechnoTimTalks (Affiliate links may be included in this description. I may receive a small commission at no cost to you.) 00:00 - Intro 00:52 - Rackmount Design 01:38 - Fabricating the metal 02:02 - Assembling the mount 02:29 - Heat Set Inserts 03:34 - Scratch Warning 03:57 - Mounting all 6 04:15 - 3D Printed material 05:00 - Connection Plan 07:19 - What I would do different if it were production 08:24 - Where in the rack to mount it 09:25 - Running cables in rack 10:23 - Mounting it in the rack 10:55 - Getting rid of my old KVM Switch 12:14 - Cleaning up cables 12:57 - Final thoughts Thank you for watching!