80/20: Enclosed Corner Bracket Overview

To Purchase: https://bit.ly/43GeMQC Find in Catalog: https://bit.ly/428g7iZ 80/20 Website: https://bit.ly/3peM7n3 Hello, and welcome to 80/20's product highlight series. Today we're going to take a look at the enclosed corner bracket. They're easy to install, require no machining, and are available in both fractional and metric. When using it, you have a choice. The enclosed corner bracket can be used as a stand alone fastening method, or to reinforce another fastening method. Here you can see a small sample of the enclosed corner brackets that 80/20 offers. Now one thing you're going to want to keep in mind when using the enclosed corner bracket is you'll need bolt assemblies to install it. Recommended bolt assemblies for all enclosed brackets can be found in the 80/20 product catalog. Now when it comes to installing the enclosed corner bracket, the first thing you're going to want to do is preload your hardware. Preloading not only makes it easier to install your bracket, but also saves you time during assembly. Now to get started, we'll take this bracket and put one last bolt and one last T-nut into it. Now it's important when you're putting the T-nut in, to make sure the pilot projection is facing away from the bracket. Get that right on there. We'll take our first bar and slide the bracket right on. We'll get that into place. We'll take our other bar and slide it on to the other half of the bracket. Once we have all that lined up, we'll take our wrench, and simply tighten down the bolts. From here we have a strong, secure, external connection. Now one last option you may want to consider is a cover cap. Simply goes right over the bracket and pops right on for a smooth clean connection. Now hopefully you have found this segment on the enclosed corner bracket helpful. For more information visit 8020.net and make sure to subscribe to future 80/20 videos. And as always, make it a great day.