80sTV Build Software02

installing monitor drivers git clone https://github.com/goodtft/LCD-show.git add permissions to the LCD-show directory sudo chmod -R 755 LCD-show/ move into the LCD-show Directory cd LCD-show/ activate the proper monitor (if purchased off the materials list, this is a MPI3508 monitor) sudo ./MPI3508-show wil reboot automatically..you'll need to SSH back into your PI alter the config file sudo nano /boot/firmware/config.txt remove the “#” from overscan left and right overscan_left=-10 overscan_right=35 use down arrow key to get to “display_rotate=0” display_rotate=2 Add the audio configurations while your in the config.txt file above “[all]' type this code dtoverlay=audremap,pins_18_19 (I misspelled audremap in the video..thats wrong) Ctl+X to exit out of nano and save the file sudo reboot SSH back into your pi sudo raspi-config Activate Audio output ...select System Options - Audio -headphones then turn VNC back on Interface Options -VNC- Yes hit TAB to finish and exit out sudo reboot you now can use VNC to log in and remote desktop your Pi to access your Pi thru your explorer go to your “Network” \\80TV from there you can mount if you like or just access it To shutdown properly use Shutdown from VNC or sudo shutdown -h now