A Pro-Ject T1 Turntable Tale!

A reader sent a distressed, somewhat angry email rant about how bad was Project's low priced T1 turntable ($599 with built-in defeatable phono preamp, Ortofon OM10 cartridge & electronic speed control) and how not being able to adjust anti-skating had ruined the Ortofon OM10 stylus and how Pro-Ject wouldn't honor the warranty, and on it went! He said the anti-skating didn't work and wasn't adjustable. And that's true it isn't! That's the point of the T1. Take it out of the box, and place it on a flat surface, connect it up and it's ready to play! I asked him to send me the turntable so I could check it out. He agreed. When it arrived I opened the box up with a friend being the cameraman. This video tells the tale. I won't tell you what I found because that would give it away! Towards the end I play a short excerpt of a record even though the stylus he sent me was pretty badly twisted. I straightened it out as best I could. The sound is picked up by the Bluetooth microphone associated with DJI Pocket 3 video camera. Project's Heinz Lichtenegger who I've known since before he started Pro-Ject in 1991 (the thumbnail photo is from 2008) sent me details of the unadjustable anti-skating system and what I should look for to see if it was correctly manufactured. Please visit the Trackingangle website for more detailed graphs and analysis! Pro-Ject also sent a new Ortofon OM10 stylus for the turntable so at the end of the video you'll hear how the turntable sounds properly set-up with the sound being directly recorded through the Lynx HiLo A/D converter. That's the tale! Subscribe to TrackingAngle YouTube channel Follow Tracking Angle on social media! Facebook group:    / 605454337542602   Twitter    / tracking_angle   Instagram:    / trackingangle