AGT H15 Updates

I have about 15 hours on the unit. I've been using it to help me dig up some pine stumps that are 5' deep and over 2,000lbs .. get those tractors and winches. This video goes over some issues and changes I've done thus far. I'm talking through part of it as I didn't make a video for everything. Here's the list covered: 1) Hydraulic cylinder failure 2) Muffler kept falling off 3) Replace hour meter (off amazon) 4) Remove oil filter I originally added 5) Re-wire the fans to disconnect switch? Not in the video, but I'd also recommend NOT buying the hydraulic arm if you are mostly digging. It gets in the way when trying to dig close to the rig, always hitting dirt. I've already bent the arms on mine. In addition the movement is extremely limited. You can only use one hole in the arm/boom for the connect due as the cylinder will hit the arm in other spots. I will eventually get some quick connects and pull it off when it gets to me enough and I feel like figuring out the hose thread sizes. Hind sight, I think the fixed arm would suffice and I didn't need to spend the extra money. Or.. buy a different one with more travel and allows the cylinder must more movement. Hope this helps. I don't check the account too often, but I will get back with any questions you post.