ArtCAM 2018 Extrude Command

#ArtCAM 2018 - #Extrude Command Extrude is one of the #Relief tool / 3D command in ArtCAM. 1.Create minimum 4 vectors to use Extrude command to its full capacity. 2.First vector for Drive Rail ,which defines the path along which the relief will be formed.There is an option to select more than one such vectors 3.Second Vector for start Profile,which defines the cross section of the relief at the start point of drive rail. 4.Third Vector for End Profile,which defines the cross section of the relief at the end point of drive rail. 5.Fourth vector for Z Modulation,which define the height of the relief along the drive rail Select these vectors one by one and click on the select button against each vector name in the extrude command form See the automatic preview ,select mode and apply. P.S. :- Lot of Resources are idle, under utilized, not properly utilized, especially Technical Resources (TR) due to lack of knowledge, support from the suppliers and many other factors. So now I am on a Mission to build a community of experts, who can help the owners of TR for its optimum utilization , which will directly or indirectly bring monetary benefits to TR owners. Join the Vision for Maximum utilization of Technical Resource available across the world to make a positive impact in the society . For more details visit : https://pradeepkumarkp.com/ https://truegrowthhub.com/ Please click the link to register for Webinar : https://bit.ly/3IzCAvB