Audient Evo 4 : With Smaart!

This video is about how to setup your Audient Evo 4 to use with Smaart and along with that, how to configure Smaart to use the Audient Evo 4 as the I/O Device. Along with it also how to use the Loopback feature on the Evo 4 to make the best use of it. Finally I also provide an insight about my opinion of the Evo 4 as an I/O device with Smaart. Timestamp : 00:07 : Introduction. 01:27 : Agenda of Video. 02:04 : Step 1 : Connect Your Soundcard and Have cables ready. 03:14 : Step 2 : Start Smaart. 04:09 : Step 3 : Configuring and Labelling I/O in Smaart. 07:30 : Step 4 : Making Physical Connections. 09:05 : Step 5 : Configuring Signal Generator. 09:35 : Step 6 : Verifying connections and Engine. 10:55 : Step 7 : Creating and Configuring TF Engine. 11:20 : Step 8 : Measuring TF. 12:11 : Monitor Mix Control Setting on Evo 4 (Most important setting to avoid system feedback). 13:56 : Understanding Loopback feature on Evo with Smaart. 16:10 : Using Evo Loopback as Virtual Reference in Smaart. 17:33 : Difference in Propagation Delay between Physical and Virtual Reference. 20:22 : Configure to Use 2 mics for measurement with Evo 4. 23:14 : Pro's and Con's. Note : My Live Mistakes : 1)17:58 : It's 0.5ms and not 0.5 seconds. 2)22:18 : The right choice of word be : Flip the polarity and not Phase. Thank you So much for watching. Do Share, Subscribe and Hit Like.