Banner VE Series Camera: Basic Inspection Set-up

In this video, Brad Vorrie shows us how to set-up a basic vision inspection using the new Banner VE Series Smart Camera and intuitive Vision Manager Software. This inspection is going to verify the correct assembly of a concrete anchor. All you need to get started is the your laptop, the ve vision manager software, and an Ethernet cable. **Note gigabit Ethernet is a standard option for the VE camera, but be sure you order the Ethernet cable in addition to the camera. The software is a free download at Banner Engineering’s website. www.bannerengineering.com Watch our VE Series Smart Camera Product Overview video here: https://www.youtube.com/watch?v=Tot2HJO5kxw Visit our Website: www.ramcoi.com Connect with us on social media: https://www.facebook.com/RamcoInnovations/ https://twitter.com/RamcoInnovation https://www.linkedin.com/company/ramco-innovations LEGAL DISCLAIMER: While we have made every attempt to ensure that the information provided is accurate and has been obtained from reliable sources, Ramco is not responsible for any errors or omissions, or for the results obtained from the use of this information. All information is provided "as is", with no guarantee of completeness, accuracy, timeliness or of the results obtained from the use of this information, and without warranty of any kind, express or implied, including, but not limited to warrantees of performance, merchantability and fitness for a particular purpose. At all times you should defer to the instructions and safety guidelines issued by the manufacturer. In no event will Ramco, its agents or employees thereof be liable to you or anyone else for any decision made or action taken in reliance on the information provided to you or for any consequential, special or similar damages, even if advised of the possibility of such damages.