Basic Ethernet Communications with EBPro Weintek Multi-HMI Connection

Weintek USA official site - http://www.weintekusa.com Call for pricing and availability 425-488-1100 Chapter 21. Ethernet Communication and Multi-HMI Connection (EasyBuilder Pro - EBPro). 0:00 - Introduction 0:28 - Setting the PLC's IP address 2:13 - Setting the HMI's IP address 3:28 - Examples 4:54 - Remote HMI Communication 10:45 - Demonstration There are two ways of Ethernet communication: * Use RJ45 straight through cable and hub. * Use RJ45 crossover cable and without hub, but this is limited to point-to-point connection (HMI to HMI or PC to HMI). Through Ethernet network, the system provides the following methods for data transmission: * HMI to HMI communication. * PC to HMI communication. * Operating the PLC connected to another HMI. Note: Remote HMI in a cMT-SVR project must be a cMT-SVR machine. Thus, a cMT-SVR cannot communicate with PLCs connected with other series, such as eMT, mTV-series. #WeintekUSA #MultiHMIconnection #BasicEthernet