Bend Tech Dragon A250 - Trick-Tools.com

See it here: https://www.trick-tools.com/Bend-Tech-Dragon-A250-Tube-Cutting-and-Marking-System-16454 The New Bend-Tech Dragon is an affordable, complete solution for tube notching, cutting, and marking tubing up to 4 inches in diameter. The Dragon is capable of taking a full length of tubing, cutting it to length, notching the end profile, making holes or slots as needed, and then marking any bend locations with rotation and degrees. Bend-Tech Dragon obtains all of the necessary information from Bend-Tech Industrial software automatically. Just add your plasma machine and computer! Included with the Bend-Tech Dragon is two powerful software packages; Bend-Tech Industrial and Bend-Tech Dragon Software. Working side by side, these products will allow you to create 3D CAD designs from scratch or convert from SOLIDWORKS, AutoCAD, Inventor, PRO Engineer, etc. into a readable format for the machine. Dragon Software will automatically create your cutting, marking and etching paths directly from Bend-Tech Industrial and comes with a nesting ability to allow several parts on the same stock tube. Key Features -12 or 21 foot bed length, unlimited working length with re-positioning -2 inch through chuck allows for re-positioning of longer material with built-in laser pointer -Works on 3/4 to 4 inch OD round tubing -Automatic tool change between plasma cutting and marking -160 lbs material capacity with the 12 foot bed and 260 lbs with the 21 foot bed -1/32 to 5/8 inch cutting capacity (dependant on plasma cutter) -Upgraded rack and pinion design ensure tolerances within +/- 0.010 inch Trick-Tools.com [email protected] 1.877.VAN.SANT