BIND Jumper T-Lite to Eachine E010 (RED Board 🚁2021)

EDIT (14 Feb. 2025): I was also able to bind the Eachine 016H to my Jumper T-Lite, which is an ALTITUDE HOLD flyer with about the same dimensions. Much easier to fly, but very noisy compared to the E010. ---2022--- On RED boards I use the E010-r5 protocol (a standalone type, not sub-type), which wasn’t present on my (JP4in1) Multi-Protocol Module when I received my 🎮 Jumper T-lite from the store! 😬 I had to flash 🔧 my Multi-Protocol Module from “1.3.1.78 aetr" to "1.3.2.61 aetr” (using a max 32GB mini SD-card). LINKS: https://downloads.multi-module.org/ https://www.multi-module.org/using-the-module/firmware-updates OPENTX? OpenTX (the OS of my transmitter (v2.3.11) I didn’t touch. I guess you can also use the “OpenTX Companion App” to update the Multi-Protocol Module, but that method is so over-complicated. Whatever you do, just make sure to shorten the filename of the update-bin-file to 7 characters on the SD card. https://www.open-tx.org/ ABOUT THE BATTERIES: 🙄 it’s of course the ENORMOUS DISCHARGE-RATE OF 45C what makes these batteries so special, not so much the step from 150 to 260 mAh. 😬 Excuse me, I should have made that much clearer, because the difference between stock (around 30C) and “better” batteries is very noticeable on these tiny drones. And It might be the first thing you want to change from stock. 🤖 Because flying with a higher discharge-rate means less sags and more stability at low refs. The effect is pretty amazing 😀 I bought these batteries a while ago. I tried to order another set, but now Banggood can’t ship to my country? https://www.banggood.com/5PCS-Eachine-E010-E010C-E011-E013-3_7V-260MAH-45C-LIPO-Battery-Charger-Sets-p-1205885.html??cur_warehouse=CN Banggood however lists these High voltage batteries as compatible with my E010? https://www.banggood.com/2Pcs-GAONENG-GNB-4_35V-450mAh-1S-80C-HV-Battery-PH2_0-Plug-For-E010-M80S-Tiny7-RC-Model-p-1303156.html??&cur_warehouse=CN That’s worth an experiment 😁 --- OLD ENTRY - (Saturday 10 april 2021) Hurrah! 🥳 Can’t believe I finally found a purpose for my E010’s ⬇️ -AS ANGLE-MODE TRAINERS combined WITH MY 🎮 JUMPER T-LITE 🤖 Mind you! 🙄 For this to work I had to flash the MULTI-Module Firmware on my Jumper T-lite (JP4in1) (using a 32GB fat32 formatted SD-card wherein I had to shorten the filename), so I could update it to a more recent version; namely v1.3.2.61. https://downloads.multi-module.org/ Info about the E010-r5 sub-type: https://www.multi-module.org/using-the-module/protocol-details/e010-r5 Not sure if the next OpenTX update (from 2.3.11 to 2.3.12) also embodies these protocols, but flashing my Multi-Protocol module from "1.3.1.78 aetr" to "1.3.2.61 aetr" worked. Very happy! 😁 Ty Mr. K. Really curious about the OpenTX "Companion" software. (OpenTX is the OS shell on most RC controllers.) https://www.open-tx.org/ Regarding the Jumper T-Lite ⚠️ (1)Don’t put the battery in the wrong way! ⚠️ (2)Don’t start it up without the Antenna! ⚠️ (3)And don’t let it charge too long! ☠️ Its so called “over-power” protection is a bit subpar. (They had to cheap out on something I guess 😐) For creating a new model on your Jumper T-Lite, then configuring and binding to your drone; this movie helped me a lot: https://www.youtube.com/watch?v=mnazg4aZe_I 🛠⚙️🥴 Settings on Jumper T-lite (MULTI-Module Firmware 1.3.2.61 aetr) & Eachine E010 (red board 2021): Page 2/12 External RF OFF Internal RF MULTI Type E010r5 (NO subtype needed) Page 5/12 INPUTS I Ail I Ele I Thr I Rud I 05 SA I 06 SB I 07 SC I 08 SD Page 6/12 MIXES CH1 Ail CH2 Ele CH3 Thr CH4 Rud CH5 I 05 CH6 I 06 CH7 I 07 CH8 I 08 CH9 & CH10 are not bound: CH9 = RTH... CH10=”GLIDE”? --- This snazzy music-track I incorporated is called: “Bush Week”: https://freemusicarchive.org/music/Nihilore/Broken_Parts/Nihilore_-_Broken_Parts_-_06_Bush_Week By the artist “Nihilore”: https://freemusicarchive.org/music/Nihilore From his album “Broken Parts”: https://freemusicarchive.org/music/Nihilore/Broken_Parts Licensed under Creative Commons 3.0 Free to: -Share — copy and redistribute the material in any medium or format -Adapt — remix, transform, and build upon the material for any purpose, even commercially. https://creativecommons.org/licenses/by/3.0/