Bit:Kits 01 - Getting Started with the Enviro:bit Kit

Part 1 [0:00] A look at what is inside our enviro:bit kit, and a brief introduction to this video series. Part 2 [2:20] - https://youtu.be/n-ygE69TEyk?t=140 How to put together the weather station from our enviro:bit kit. Part 3 [7:04] - https://youtu.be/n-ygE69TEyk?t=424 How to install the enviro:bit blocks in make:code Part 4 [9:47] - https://youtu.be/n-ygE69TEyk?t=587 Taking some simple readings and displaying them. Challenges: Can you make the micro:bit scroll the temperature, and then a "c"? Can you make the micro:bit display an icon before each reading? Can you work out what the readings in the "expert" menu show you, and why you might need these? Link to the makecode project: https://makecode.microbit.org/_LLJDofXLDP09 Part 5 [12:59] - https://youtu.be/n-ygE69TEyk?t=779 Do you want to see how sound levels change around you? Make your kit show you a graphic representation of the sounds around you with just a few blocks of code. Challenges: "Sound level" is constantly reading a single value, but "noise level" takes 5 readings and shows you the highest. Use "noise level" to see how loud you can shout - keep a high score table! Make a happy/sad monitor for noise levels - if the noise level is above a certain number, you could show a sad face. Link to the makecode project: https://makecode.microbit.org/_d0PPYsHF4Aow Link to the kit on our store: https://shop.pimoroni.com/products/enviro-bit-micro-bit-kit