BUILD GUIDE: Herja

This is the complete build tutorial for Herja, our mountable short dart side-along flywheeler blaster. Like its Norse namesake, she *devastates* in close-quarters gameplay. We'll have a full launch video published soon, but we thought we should make the build guide available sooner for those who purchased a DIY kit from us. As always, we try our best to be as clear and consise as possible. If you have any questions on this build or suggestions on how to make future tutorials even better, don't hesitate to contact us: [email protected] Want to build one for yourself or have us build it for you? It's your choice! Find both listings with the link below: https://outofdarts.com/collections/herja Do you like written instructions more than video? We'll have a full write up on our blog in just a few days! https://outofdarts.com/blogs/news FAQ & Corrections: -If you have any questions about products we sell on the shop, don't hesitate to shoot us an email: [email protected] - Chapter Timecode will be completed by 12 PM tomorrow morning! 0:00 Opening 0:36 LiPo Safety Brief 1:09 Included in the Kit 2:10 Tools & Supplies Required 3:31 Let's Get Going! - Installing the Square Nuts & Detents 7:13 Installing the Motors & Flywheels 9:20 Wiring the Master On/Off 10:02 Assembling the Pusher Mechanism 13:20 Wiring the N20 Pusher Motor 14:16 Assembling the Internal Switch Mechanism 15:58 Wiring the Flywheel Motors 17:08 Installing the Flywheel Cage 17:41 Wiring the Master On/Off (cont) 18:35 Wiring the Internal Switch 20:10 Wiring the N20 Pusher Circuit 20:50 Wiring the XT-30 Battery Connector 23:03 Wiring the N20 Pusher Circuit (cont) 23:29 Wiring the Internal Switch (cont) 24:59 Wiring & Installing the XT-30 External Switch Connector 27:50 Final Blaster Assembly 28:40 Assembling the Rail Receiver 29:51 Installing the Rail Receiver 31:17 Installing the Picatinny Rail 32:06 Wiring & Assembling the External Switch 34:07 Installing the Battery & Initial Testing 35:36 Test Firing the Blaster 36:14Closing Remarks Out of Darts, run by Luke, is a one-stop nerf-modding hobby shop. We carry all the supplies, tools, and accessories to make your modding journey easier! We create original 3D-printed blasters and mod parts with almost 100 Prusa printers. Check out our site below for guides, build lists, and resources. Please subscribe for more! http://tinyurl.com/jnuot5d My web store: https://www.outofdarts.com Product questions? [email protected] Follow me on Instagram for sneak peeks: http://instagram.com/outofdarts Edited by J Perry Heun, Out of Darts Media Producer