Building A Bodgers Shavehorse (Complete Tutorial)

*Here Are Some Important Links:* 🌆 Grow your audience. Monetise your craft. Create consistent income - https://academy.zedoutdoors.com 🎬 Browse all my video tutorials, neatly organised by subject - https://zedoutdoors.com/video-tutorials ☕ Support the channel & help keep these videos free - https://zedoutdoors.com/buymeacoffee 📱Catch my latest updates on Instagram - https://zedoutdoors.com/instagram *Click the link below to connect with Neill Mapes:* Neill Mapes Facebook - https://www.facebook.com/neill.mapes Neill Mapes Instagram - https://www.instagram.com/greenman2020 *Below is a detailed timestamp of this video:* 00:00:00 - Intro 00:03:31 - Example of a Bodgers style shave horse 00:07:31 - Assessing the piece of Ash and making a score line 00:10:28 - Splitting the Ash with metal wedges 00:15:25 - Severing the straps (fibres) with an axe 00:18:48 - Securing the split Ash with Timber Dogs 00:22:17 - Making a straight line on the split Ash using a chalk line 00:23:07 - Neill discussing how he is going to level the face of the split piece of Ash 00:25:26 - Levelling the face of the split Ash with a small forest axe 00:27:50 - Making some stop cuts on the face of the split Ash with a chainsaw 00:30:47 - Levelling the face of the split Ash with a broad axe 00:33:08 - Type of woods you can use to make a shave horse 00:34:46 - Marking the length of the shave horse 00:36:15 - Laying the Ash on its front and marking the central line / outline 00:43:10 - Shaping the saddle with an adze 00:49:08 - Shaping the saddle with an in-shave 00:53:54 - Shaping the saddle & surface with a travisher 01:04:10 - Milling a plank using an Alaskan chainsaw mill 01:08:26 - Cleaving the legs 01:12:38 - Shaping the legs with an axe 01:18:32 - Shaping the legs with a draw knife 01:23:54 - Shaping a round tenon on the leg using a rounder plane 01:28:25 - Drilling the holes for the legs using a scotch eyed auger 01:34:20 - Inserting the leg into the body 01:37:13 - All legs fitted and testing stability of the shave horse 01:38:11 - Cutting the side arms from the plank using a saw 01:45:16 - Cutting the ramp from the plank using a saw 01:47:25 - Discussing and making the wedge / block that goes underneath the ramp 01:50:12 - Discussing the side arms and the round pieces that go into it 01:54:48 - Cleaving the round components 01:57:17 - Shaping the round pieces with an axe 02:01:12 - Shaping the round pieces with a draw knife 02:04:31 - An introduction to Pole Lathe 02:07:23 - Turning the round foot piece that attaches to the bottom of the side arms 02:17:21 - Turning the round clamp piece that attaches to the top of the side arms 02:26:25 - Turning the round pivot piece that attaches to the middle of the side arms 02:33:24 - Turning the round peg piece that locks the ramp in place 02:38:35 - Techniques for cutting a Tenon if you don’t have a Rounder Plane 02:43:30 - Looking at all four round pieces that were turned 02:45:12 - Measurements for the holes on the side arms 02:46:33 - Tweaking the top round clamp piece so it grips wood better 02:48:48 - Drilling the holes in the side arms using a Brace & Bit 02:53:02 - Using a steel wire on the pole lathe to add an effect to one of the round pieces 02:54:17 - Doing a dry run to check that all the round pieces fit into the side arms ok 02:55:16 - Drilling the holes into the main body using a brace & bit 03:01:34 - Drilling the hole into the ramp using a brace & bit 03:05:30 - Carving oak pegs with a straight edge knife and drilling holes the holes for it 03:07:58 - Conclusion *As always, I appreciate you watching* Until the next video, take care Peace Zed