Building the Commander Pro and First Thoughts

After receiving the Commander Pro, flown in from China by EWheels, I assemble the wheel and offer my impressions during the process. Time Index 00:00 Introduction 01:30 Unpacking the batteries / side panels 05:32 Unpacking the Commander Pro 10:30 Close look at the raw wheel 12:22 Closer look at the roller bearings 12:12 Motor phase wire channel 14:17 Closer look at the underside of the upper chassis 14:51 Getting into the controller box 17:20 Broke the rear light 18:17 Closer look at the bottom of the suspension 19:09 Closer look between the tire and the upper chassis 20:12 The pedals 23:39 The trolley handle 25:12 The display 26:00 The mudguard 27:17 Failed mudguard installation 28:58 Where are the front & rear bumpers? 31:02 Charge ports - a miss 33:35 The Roger Charger 35:12 Adjusting the suspension 37:47 Installing the pads 39:11 Clark Pads for the Commander Pro 40:45 Wrap-up Best EUC Fast Charger Ever: https://youtu.be/OagKvVEq5po Visit my Amazon Store for quick links to much of my gear: https://www.amazon.com/shop/electricunicycles For a complete list of all the equipment, tools, and associated "stuff" that I use, please visit my equipment webpage: https://www.electricunicycleworld.com/p/my-equipment.html Interested in joining me on any Southern California rides? Join my Telegram group for all the latest ride information. Send me an e-mail (my name @ gmail.com) and I'll send you the Telegram link. I buy many of my wheels from EWheels. Why? Because of their selection, price, and perhaps most importantly, Jason's dedication to customer satisfaction and his ongoing support of the community. If the website doesn't list what you are looking for, give them a call. Use this link which lets them know that I've referred you: https://www.ewheels.com/MartyBacke