How to Pick Riding Boots | CE Ratings Explained

More Details on the Certification: 1st Number - Ankle length (1), tall/shin length (2) --- 2nd Number - Abrasion Resistance * checks how many seconds it takes for the material to wear out fully * all material combinations used in the boot are pressed against abrasive 60 grain paper revolving at 8 m/s * simulate sliding across the road/asphalt surface: - level 1: survive without disintegrating for ≥ 5 seconds; - level 2: survive without disintegrating for ≥ 12 seconds; --- 3rd Number - Impact Cut Resistance * checks the penetration of a blade dropped on every combination of outer and inner linings and reinforced parts in the boot * simulates the upper layer being cut by a sharp surface with a speed of impact 2.8 m/s (~10km/h): - level 1: ≤ 2.5 cm penetration and, - level 2: ≤ 1.5 cm penetration --- 4th Number - Transverse Rigidity (Crush Protection) * checks the force needed to be applied onto the finished boot to compress it by 2cm * simulates the foot being crushed under the vehicle: - level 1: ≥ 1,0 kN (~ 100kg) - level 2: ≥ 1,5 kN (~ 150kg) --- Sources: https://youtu.be/OpRFi6h0E48?si=4qPHoB6g_Xkct5SZ https://www.tcxboots.com/lt/en/certifications.html https://www.dainese.com/us/en/demonerosso/moto/how-does-certification-for-motorcycle-shoes-and-boots-work/651309031.html https://revitsport.com/pages/ce-certification-explained --- Chapters: 00:00 Intro 00:26 Boots Intro 00:46 1st Number - Boot Length 00:57 2,3 Numbers - Abrasion, Impact-Cut 01:51 4th Number - Transverse Rigidity (Crush Protection) 03:07 Additional Tests 03:58 CE Rating Flaws 05:15 Extra Details - Check Description 06:01 Conclusion (Pls Subscribe) --- Keywords - [ royal enfield wanderer, ce certified riding boots, ce certification, wanderer wp, wanderer boots ] --- #wanderer #wandererboots #cecertified #ridinggear #ridinggears #ridingboots #royalenfieldwandererwp #royalenfieldwandererboots #royalenfieldwanderer