CFD Tutorial #19 : Post Processing of 3-D Bubble Column Part - V (with Audio)

This tutorial demonstrates how to do the following: Set up a transient bubble column Use the Eulerian multiphase model Solve the problem using appropriate solver Postprocess the resulting data A 2D rectangular geometry (of 0.1 x 1 m2) is modeled as a bubble column. A sparger at the bottom edge (of length 0.02 m) is created at the middle of the bottom edge. Air with a superficial velocity of 0.01 m/s is introduced through a sparger at the bottom of the column. The details of the sparger are not modeled. Instead, it is treated as a uniform inlet surface with an area of 2e-4 m2. The air bubbles are assumed to have a mean diameter of 3 mm. The liquid in the column is water, and a degassing boundary condition is used at the outlet. ====================================================== To subscribe: http://bit.ly/learninghub4All To create a custom link: go to bit.ly Requirements: Simulation Software: ANSYS 14.5 Video Editing tool: Final Cut Pro X (FCPX) For More Details please visits: More Details ====================================================== Tecplot Downloading Link : https://drive.google.com/drive/folders/1VQCwq4hlDF_ZmWvP2Dz3t-9LDvzkY-8W?usp=sharing Ansys 14.5 downloading Link: https://drive.google.com/drive/folders/1mBTfn9qgRIXlfv6CgdlmZ0YIxnasu3b6?usp=sharing ======================================================= CFD Tutorial #18 : Gas-Liquid Multiphase Flow Simulation: 3-D Bubble Column Part - IV (with Audio) https://youtu.be/W1R2M45SG7Q CFD Tutorial # 17: Gas-Liquid Multiphase Flow Simulation: Bubble Column Part - III (with Audio) https://youtu.be/AKPWoBHQ72k CFD Tutorial # 16: Gas-Liquid Multiphase Flow Simulation: Bubble Column Part - II (with Audio) https://youtu.be/AFTtsxOzs5I CFD Tutorial # 15: Gas-Liquid Multiphase Flow Simulation: Bubble Column Part - I (with Audio) https://youtu.be/fRnkT7zwDd0 CFD Tutorial #14: Use of Loft and Sweep in Design Modular: Basic Tutorials https://youtu.be/gm4xLpIxyHE CFD Tutorial #13: Body Creation Using Revolve Feature in Design Modular: Basic Tutorials https://youtu.be/86SKatj2q6w CFD Tutorial #12: Body Creation Using Extrude Feature in Design Modular: Basic Tutorials https://youtu.be/fRnkT7zwDd0 CFD Tutorial #11: Design Modular : Basic Tutorials https://youtu.be/bT3PiQ23vmw CFD Tutorial #10: Heat Transfer in 2-D Laminar Pipe Flow by Heating Wall - Part I https://youtu.be/fRnkT7zwDd0 CFD Tutorial #9: How to use the custom drag model with #Fluent14.5 (with Audio) https://youtu.be/OPBecJn1a3A CFD Tutorial # 6: Gas-Solid Fluidized Bed Simulation: Graphics and Contour Plots Using #Fluent14.5 https://youtu.be/jYJXW9J9mRQ CFD Tutorial # 5: Gas-Solid Fluidized Bed Simulation: Model Setup and Solution Using #Fluent14.5 https://youtu.be/IUI2B8rvXk0 CFD Tutorial # 4: Gas-Solid Fluidized Bed Simulation: Geometry & Meshing https://youtu.be/UQn0yag8zHE CFD Tutorial #3 : Turbulent Flow in Pipe using 2-D Axis-symmetric Model in #AnsysFluent #CFDPost https://youtu.be/gUqzW0DH3p0 CFD Tutorial #2 : Turbulent Flow in Pipe using 2-D Axis-symmetric Model in #AnsysFluent #CFDPost https://youtu.be/vw2okRbX7Rk CFD Tutorial # 1: Laminar Flow in a Pipe using 2-D axisymmetric model in #AnsysFluent #CFDPost https://youtu.be/Lxj3GPR5jrs