Change vTX channel and LED color with a single button push (Tiny Trainer Tutorial)

Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST: https://www.fpvknowitall.com/ultimate-fpv-shopping-list SUPPORT ME ON PATREON at: http://bit.ly/2Ep5Sia THIS IS MY FULL TIME JOB. Here are other ways that you can support me: https://www.fpvknowitall.com/support-me/ --- 00:00:00 - Two things racers MUST do! 00:00:52 - The premise for this video If you have a radio without 6pos switch, use this method to substitute a momentary switch instead: https://www.youtube.com/watch?v=wa43z6XohW4 If you need to do the basic LED setup leading up to this video, here's the tutorial: https://youtu.be/WIotROCU2VY 00:02:27 - Set up 6pos mixer lines 00:05:08 - Output values contro LED colors mapped to each button 00:07:57 - The complete Mixes setup 00:08:29 - Pre-conditions for video transmitter to work Basic SmartAudio troubleshooting: https://youtu.be/thR2XA_0PLM To find your vtxtable in Betaflight 4.3, the best approach is to look in the Presets tab, where many common vtxtables are found. For a complete tutorial on the Video Transmitter tab: https://www.youtube.com/watch?v=t28pDCYENuI&ab_channel=JoshuaBardwell 00:09:11 - In receiver tab, note aux-channel values for each led color 00:09:59 - Use vtx command to change vtx channels based on aux channel 00:15:05 - And now it works!!!!