Create Perfect-Fitting Openings for Router Table Insert Plates

Infinity Tools D.I.Y. Router Template Package RTI-DIY More Info: https://www.infinitytools.com/infinity-tools-diy-router-template Blog: https://www.infinitytools.com/blog/2017/11/05/create-perfect-fitting-openings-for-router-table-insert-plates/ Subscribe: https://www.youtube.com/user/InfinityTools?sub_confirmation=1 Facebook: https://www.facebook.com/InfinityCuttingTools/ Twitter: https://twitter.com/InfinityTools1 Instagram: @InfinityTools (https://www.instagram.com/infinitytools/) Our exclusive router insert plate installation kit creates a perfectly-sized opening in your shop-made router table. Designed for 9-1/4" x 11-3/4" router insert plates. Works with tables from 3/4" to 1-7/8" thick. Includes everything you need to create the opening and rabbeted ledge that supports the insert plate. All you need to supply is a jig saw and a router. Use the included large bearing against the template as a scribe to lay out the opening. Remove the waste with a jig saw. Then create the rabbeted ledge using our pattern bit. Finally, clean up the edges of the opening while creating a 1/2"-wide rabbet using our flush trim bit outfitted with the large bearing. The Infinity Tools Steel Insert Ring (item RTT-IRS) sits under your router plate (or router lift) to prevent wear in the router table top from the adjustment screws. Sold separately below, we recommend this 1/32" thick stainless steel ring to be used for any router table top with at least a 7/16" deep router plate rabbet depth. A foolproof method for custom router insert plate installation. The Full D.I.Y. Router Template Package (item RTI-DIY) Includes: (1) Router Table Insert Template (item 115-020) (1) Flush Trim Router Bit (item 06-629) (1) 1-1/2" Bearing (item BR-125) (1) Pattern Router Bit (item 52-501B) (1) Infinity Tools Router Table Steel Insert Ring (item RTT-IRS) We also recommend our double-sided tape: https://www.infinitytools.com/shop-essentials/adhesives/double-sided-tape