Newer version here: https://youtu.be/8tXn6iJP5-4
MiSTer is a FPGA project that allows you to run Retro computers at full speed.
NOTE: It's recommended you have a heat sink
This tutorial shows you how to set up the DE10-Nano with minimal experience with Windows or FPGAs.
Beginner Guide from GitHub
https://github.com/MiSTer-devel/Main_MiSTer/wiki/Beginner-Setup-Guide
SD Card Formatter
https://www.sdcard.org/downloads/formatter_4/
Where I bought the DE10-Nano
https://www.digikey.ca/product-detail/en/terasic-inc/P0496/P0496-ND/6817231
Where I bought the SDRAM board (And now the heatsink, fan, I/O Board)
https://www.cbmstuff.com/
