Death Star Cutting Board from solid surface

In this video I will show you how I take a piece of black solid surface material and make a Death Star cutting or serving board. TOOLS The tools I used on the project were as follows: - X-Carve 1000mm CNC Machine by Inventables - https://www.inventables.com/technologies/x-carve?ref=MakingAtHome - Router Bit - 1/8" Fishtail Spiral Upcut Bit - https://www.inventables.com/technologies/solid-carbide-fishtail-spiral-upcut-bits-1-8-in-d?ref=MakingAtHome - Router Bit - 1/32" Fishtail Spiral Upcut Bit - https://www.inventables.com/technologies/solid-carbide-fishtail-spiral-upcut-bits-1-32-in-d?ref=MakingAtHome - Router Bit - 1/4" 2 Flute Spiral Upcut Bit - https://www.inventables.com/technologies/2-flute-spiral-upcut-1-4-shaft-1-4-cutting?ref=MakingAtHome - Router (for round overs) - Router Bit - Whiteside Router Bit 2000C Round Over Bit with 1/8-Inch Radius - https://amzn.to/3n6mM9W - Random orbit sander - Shop vac - Tape Measures (my favorite two): Fastcap PMS-16 Auto Lock ProCarpenter Tape Measure - https://amzn.to/333fTMN or FastCap PSSR16 16 ft Standard Reverse Measuring Tape - https://amzn.to/35eQe6k SOFTWARE - Easel Pro Software by Inventables - https://www.inventables.com/technologies/easel?ref=MakingAtHome - Affinity Designer - https://affinity.serif.com/en-us/designer/ MATERIALS - Solid Surface Material - One brand of solid surface counter top material is Corian, but there are other manufacturers such as Durasein Solid Surface. - Various sand paper - Black Onyx pigment from Black Diamond Pigments - https://www.blackdiamondpigments.com/products/imperial-black-onyx-42g-1-5oz?_pos=2&_sid=3f844b46b&_ss=r&&sca_ref=720311.3R7VmpIqEs - Total Boat High Performance Epoxy quart kit (medium speed) - https://amzn.to/3aITVD0 - Odie's Oil Universal Finish - 9oz Jar - https://amzn.to/3vmofwG - Silicone caulking (to keep epoxy from running off the material) NOTE: As an Amazon Associate I earn from qualifying purchases. Other affiliate links may be used on this page, but do not affect pricing of the items. NOTE: If you plan on using any tool for a project please make sure you are familiar with the tool and all of the dangers associated with it. If you are not familiar with a tool then you should ask someone who is to show you the proper way to use it. A lot of communities have classes at local colleges on the proper use of tools and machinery. There are also local woodworking clubs that offer classes at very reasonable rates for beginners. I highly recommend using these resources for your safety and for the most efficient use of the tool. SAFETY FIRST Always wear eye and hearing protection. Always work safe with the proper safety equipment and guards on your tools.