Delta PLC HMI Advanced Automation Tutorial 6

Class Topics: Create a User-Defined Function in ISP Soft for motor control. Operate multiple motors using this function with defined timing sequences. Design an HMI Display for real-time monitoring and control, allowing users to set motor forward and reverse timings via the HMI. Implement Time Settings with User-Defined Parameters: Forward On Time (T1): User-defined ON time for forward operation. Forward Off Time (T2): OFF time before switching to reverse (Forward + Reverse cycle). Reverse On Time (T3): User-defined ON time for reverse operation. Reverse Off Time (T4): OFF time before switching back to forward (Forward + Reverse cycle). Components Involved: Motor-1: Controlled via Actuator/Relay. Motor-2: Operates in coordination with Motor-1. Start Switch (SW): Initiates motor operation. Stop Switch (SW): Stops motor operation. --------------------------------------------- Project: Washing Plant Motor Forward & Reverse Control Using Delta DVP PLC and DOP HMI System Overview: Implement forward and reverse control of a washing plant motor using a Delta DVP PLC. User Interface (UI) and Visualization will be designed using a Delta DOP HMI for monitoring and control. The system allows the operator to set motor forward and reverse timings via the HMI. Control Logic: Start/Stop Control: Operate the motor using a Start and Stop button. Forward & Reverse Operation: Motor runs forward for a set duration (T1). After a delay (T2), the motor switches to reverse operation for a set duration (T3). After a delay (T4), the cycle repeats or stops based on user input. Interlocking Protection: Prevents simultaneous forward and reverse activation. HMI Functionality (DOP HMI): ✅ Real-time Motor Status Display (Forward/Reverse/Stopped) ✅ User-defined Timer Settings (T1, T2, T3, T4) for cycle control ✅ Start/Stop Control Buttons for manual operation ✅ Fault Indication & Alarm Display