DIY Brompton LED Sign/Light

3D printable files: Unfolded Brompton: https://makerworld.com/en/models/2063869-brompton-led-sign Folded Brompton: https://makerworld.com/en/models/2063888-folded-brompton-led-sign Some links below are affiliate links but most of the items are the things I used specifically in this video. Most items are relatively generic but stick to the LED strips I linked or ones with the same specifications if you know what you are looking for. Materials: LED Silicone Strip: https://s.click.aliexpress.com/e/_c3qifBsv *Note 5m is enough for 4 LED Signs (each unfolded Brompton sign uses about 1.1m of LED strips) 26AWG Wire: https://s.click.aliexpress.com/e/_c3P65QNJ Heatshrink: https://s.click.aliexpress.com/e/_c2RUAeO1 0.5mm Solder: https://s.click.aliexpress.com/e/_c433G7l7 Flux: https://s.click.aliexpress.com/e/_c3XbTu89 USB Cable (better to just use an old cable): https://s.click.aliexpress.com/e/_c36zROvn Tools: Miniware TS80P: https://s.click.aliexpress.com/e/_c2JW2MBx Leatherman Charge +: https://www.multi-tool-store.co.uk/leatherman-chargeplus Flush cutter: https://s.click.aliexpress.com/e/_c3y3E3Vx If you want to buy a premade one, it is available here: https://www.velocityprintworks.com/products/brompton-led-sign Timestamps: 00:00 - Intro/Overview 02:22 - Tools and parts needed 03:11 - Cutting LED Strips 07:18 - Wiring 19:56 - Finished! 20:33 - How to win this Instagram: @velocityprintworks Email: [email protected] Webstore for things I make: www.Velocityprintworks.com