DIY CNC Plasma Controller

This is a DIY CNC Plasma Controller replacement for my Langmuir Crossfire stock controller. I needed more inputs and other functionality to support the mods I made to the machine. This is what I came up with. Parts: Proma SD THC Kemo water switch for ohmic The controller is an AXBB-E. I bought the one bundled with UCCNC http://www.shop.cncdrive.com/index.php?searchstring=axbb&x=0&y=0 Enclosure (it was cheap and is ok. I have an aluminum board I used to mount the components on. I cut it on the plasma.) https://www.amazon.ca/gp/product/B005T94MQU/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1 3 x Stepper driver https://www.amazon.ca/gp/product/B07KCBJ31Z/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1 ethernet panel jack https://www.amazon.ca/gp/product/B00ZWQCN4I/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 24V 80mm fan https://www.amazon.ca/gp/product/B07SWRWX52/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 arming switch for torch on/off https://www.amazon.ca/gp/product/B000GTMUUI/ref=ppx_yo_dt_b_asin_title_o04_s01?ie=UTF8&psc=1 5V power supply (for the axbb-e power) https://www.amazon.ca/gp/product/B00DECXUD0/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1 24V power supply (for axbb-e inputs and 24V fan) https://www.amazon.ca/gp/product/B018RE4CWW/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1 36V power supply for steppers (this one is adjustable between 0 to 48V. The reason I ordered it was because of fast shipping. A 36V 350+W power supply would be fine) https://www.amazon.ca/gp/product/B0716XVR7P/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1 24V 8 relay board https://www.amazon.ca/gp/product/B07WT9SGPK/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1 2 pin aviation plugs (12mm) https://www.amazon.ca/gp/product/B01MPXOOI3/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 4 pin aviation plugs (12mm) Note next time I would use 16mm for these for the steppers https://www.amazon.ca/gp/product/B01MPXOOI3/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 Power switch (this one is only 5am fuse but rated for 10amp. I ordered it because I had a 10amp fused on hand and it was quickest delivery. https://www.amazon.ca/gp/product/B0795S569L/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1 din rails and terminal blocks https://www.amazon.ca/gp/product/B07KRDJCYB/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1