Here's how I made my own Handstand Canes! PS I'm not a professional and made these just for fun!
Here's what I used:
Four pieces of 2x4 wood. These were in the scrap section of home depot so they already came cut!
Handsaw to cut the small handholds.
Wood screws. I bought the multipack so I used the longest ones for the base and the shorter ones for the flanger.
Drills and drill bit.
Four Flanges 1/2. These can be found in the plumbing section.
Two 1/2 galvanized pipes. The shortest ones they had at my store were 14" but I'd recommend shorter if you can find them.
Hand sander for smoothing down edges.
