DIY Keg Washer

Washing kegs and carboys can be a pain. Here's a project I've wanted to tackle for quite some time and it's finally here. The DIY Keg Washer. Nothing more than a pump in a bucket and about 7 or 8 dollars worth of PVC parts. The plans and parts list come from the Brülosophy website: http://brulosophy.com/2016/12/22/brublaster-keg-carboy-washer-do-it-yourself/ I've listed below the parts that I used. Keg Spray Wand: 3/4″ Female NPT x Female HT Swivel PVC Fitting 3/4″ Female Slip to 3/4″ Male Pipe Thread Adapter 2″ piece of 3/4″ PVC Pipe (cut from 2′ pipe listed below) 3/4″ Slip Tee x 3/4″ Female NPT branch 3/4″ x 2′ PVC Pipe 3/4″ PVC Slip Cap 3/4″ Male NPT Hose Nipple Keg posts and dip tube cleaning assembly: 3/8″ Female Hose Adapter 40″ of 3/8″ ID vinyl tubing 3/8″ PVC Tee Fitting Barbed Gas Disconnect Barbed Liquid Disconnect (7) Small Hose Clamps