DIY Milker Combo

Very brief overview of a DIY milker similar to a Venus 2000 (Venus for Men) or a Tremblr. There is not enough info to go and build one in the video, but a guide with materials list is a work in progress at: https://github.com/MikesMachines/MilkIt If you can drill a hole into aluminum you can definitely make one of these. I've built about a dozen in many configurations. Different cylinders (SC, SDA, MAL), mountings, brushed stepper motors, . It takes around 4 hours for a first time and can cost anywhere from $150-$250 (USD) . About half the cost is the motor. While milkers don't get much of the benefits stepper motors offer, thrusters definitely do. For under $70, StepperOnline has a NEMA23 3NM with either a 556 or 542 driver available on Amazon. For $80, this 220RPM, 100w, 4NM, 24v brushed gear motor will handle anything you can throw at it. https://www.amazon.com/gp/product/B09MLZ8W6M/ (no longer available)