DIY – Neck mechanism

Install moviments on your animatronic head or puppet! This 3D printed neck mechanism can be controlled by an arduino or RC. Build a real animatronic! #Animatronics #puppets #RobotNeck #Neckmechanism STL files: https://www.thingiverse.com/thing:4670841 List of parts: 3X servo MG995 or similar- https://s.click.aliexpress.com/e/_AoZbaf 4X ball joint 3x3mm (both sides of the brass ball is convex) - https://s.click.aliexpress.com/e/_oBv7ByZ 1X Cardan Joint 6mm x 5mm - https://s.click.aliexpress.com/e/_Adzyty 1X bolt 5mm x 20mm 4X bolts 5mm x 25mm with nuts 12X bolts 3mm x 10mm with nuts 2X bolts 3mm x 12mm with nuts 4X bolts 5mm x 15mm with nuts 3X 6mm nuts 2X 3mm nuts with washers 6X 3mm nuts 1X 6mm threaded rod ( ~ 130mm) 1X 3mm threaded rod ( 3 pieces of ~ 80mm) Help me keep creating projects and sharing the files for free, also, some Arduino codes, MP3 files and more are available on my Patreon: http://www.patreon.com/HendrikxWorkshop Thanks, Enjoy it! Follow Me Here Too: - Instagram: instagram.com/hendrikxworkshop - TikTok: tiktok.com/@hendrikxworkshop Music: Music by longzijun (Hendrikx Workshop opening) Punky by bensound Beyond the line by bensound