Dyed Mega Mandala | Step by step | DIY Macrame | Tutorial 4K

Hi everyone! 😀 I'm so happy to have created my macrame mandala, which so many of you have been asking for! Here it is – finally made! You can find my step-by-step tutorial video here. I hope many of you will love it and enjoy making it! 🥰 Cords available: shop.bobbiny.com Prym Glue: https://www.prym.com/en/textil-adhesive-9 Metal ring (20 cm): https://shorturl.at/Znsxz Metal ring (60 cm): https://shorturl.at/k1hw8 Needle: https://shorturl.at/OmdSm Rit Dye: https://www.ritdye.com/ Clothing Stand: https://shorturl.at/YZKao Diameter: 77 cm (30.31”) I used 287 m (11299.2") of 3mm braided cotton cord. Chapters: 00:00 - Intro 00:16 - Materials needed 00:29 - Measuring the cords 01:09 - Attaching cords - Lark's Head Knots 08:57 - Making the patterns 1:05:15 - Attaching the large metal ring 1:15:00 - Adding extra cords 1:19:24 - Patterns outside the metal ring 2:02:06 - Dyeing the mandala 2:27:18 - Finish • Materials needed: 60 cm (23.62”) metal ring 20 cm (7.87”) metal ring 3 mm braided cotton cord Scissors Tape measure Large needle Fabric glue Yarn dye (any color) Paintbrush • Lark's Head Knots: Hold the folded cords and place the loop behind the rod or dowel where you want to attach them. Take the loose ends of the cords (the ones that are not in the loop) and pass them from the front to the back of the rod, pulling them through the loop. Pull the ends tightly to secure the cords to the rod. The loop at the top should now sit snugly on the rod, and the two loose ends should hang down. • Square knots: 1.Start with four cords. 2. Bring the left cord over and to the right of the two anchor cords. 3. Place the right cord over the left cord. 4. Bring the right cord under the anchors and through the loop formed by the left cord. 5. Pull and you have the first half of the Square Knot. 6. Bring the right cord over and to the left of the two anchor cords and place the left cord over it. 7. Bring the left cord under the anchors and through the loop formed by the right cord. 8. Pull the cords and you have the finished Square Knot. • Double half hitch knots: 1.Choose a static cord to tie the Hitches around. Hold the static cord at the desired angle of the “line” you wish your knots to form when finished. 2.Using the next available hanging cord tie a Half Hitch around the static cord twice. 3.Pull to tighten the knots and move them to the desired position whilst still holding your static cord at the desired angle • Berry knot: The Berry knot is created by making 3-4 Square Knots underneath each other. You then pull the 2 middle cords through the small opening you left above the first Square Knot to create a berry-shaped knot. #hangamacrame #macramelove #art #fiberart #handmade #foryou #bohemian #giftideas #homedecor #artoftheday #support #supportsmallbusiness #for #foryourpage #autumn #fall #leaves #autumnleaves #bohostyle #fiber #fiberart #macrame #macrametreeoflife #macramewallhanging #macramé #arboldelavidamacrame #makramee #treeoflifemacrame #macrametutorial #arbredeviemacramé #MAKPAME #macrametreeoflifetutorial #macrameshelf #makrama #macramewallhangingtutorial #macramedesign #minimacramewallhanging #macramewallhangingnewdesign