EasyPLC's Machine Simulator Editor Tutorial Using The Saw Gantry

Let's show how to add a Start-Stop station in EasyPLC's Machine Simulator Editor using a few times saving tips. This video may run a little longer than normal, however, if you watch the whole video, you will thank yourself later. As always, thank you for your support, I truly have the utmost respect for those who support me because you are the ones that will become the next leaders in our industry. 0:00 The Gantry System Running 1:06 Starting to understand machine editing 3:07 Opening the EasyPLC's Machine File 3:40 Location C:\Nitrtec\Machine Simulator3\ msbin_Data\MyMachines 4:20 Easiest Ways to Navigate in the Editor Mode 6:00 Adding the Start Push Button 6:15 Adjusting the Push Button Position 6:50 Editing the Push Button OPC Name 7:45 Adding a Push Button Label 8:25 Assigning Inputs and Outputs for OPC 9:10 Adding the Stop Push Button 9:20 Matching Push Button Dimensions 11:45 ALT key Movement to Check Alignment 12:00 Adding Two Panels on Accident - Will Delete 13:25 Adding the Start=Stop Station Box 13:50 Adjusting the cabinet height 15:50 Simulating the New Start-Stop Push Buttons 16:00 Testing the Inputs and Outputs 16:45 Editing the OPC in Machine Simulator 19:00 Testing the Start-Stop Pushbuttons with the Ladder Logic 20:45 Troubleshooting the PLC Ladder Logic 22:40 Editing the PLC Ladder Logic 26:30 Testing the PLC Ladder Logic After FIx 27:07 Yah...The System Works As Designed. 28:11 Recommended Videos For You I hope it helped. Thank you for watching the video. Learn, Implement, Succeed Visit: https://www.allen-bradley-plc-training.com/ Other social media: LinkedIn: https://www.linkedin.com/in/shane-welcher-sr/ Facebook: https://www.facebook.com/OnlinePLCSupport #EasyPLCMachineEditor #EditingMachines #SimulatePLC