ECE3613: Running an assembly program using Microchip Studio

This is a quick introduction about how to create and run an assembly program using Microchip Studio. The board used in this video is part of the Temple University ECE3613 curriculum. The sample program used in the video is provided below: ; ; ECE_3613_ASM_test.asm ; ; Basic program to turn PORTA LEDs on and off with 1 second frequency ; Author : Jeremy McGinnis ; ldi R19, 0xff //load R19 with 255 out DDRA, R19 //set DDRA as all outputs out PORTA, R19 //set PORTA LEDs High start: in R18, PINA //read in value of PORTA eor R18, R19 //XOR PORTA out PORTA, R18 //write PORTA with XOR result in R18 call DELAY //execute DELAY subroutine rjmp start //go back to start //1 second delay blocking timer DELAY: ldi r20,32 L1: LDI R21, 200 L2: LDI R22, 249 L3: NOP NOP NOP NOP NOP NOP NOP DEC R22 BRNE L3 DEC R21 BRNE L2 DEC R20 BRNE L1 RET