The Elite Software HVAC Tools program is a windows based computer program that allows the quick calculation of 13 common HVAC design tasks. These tasks include duct sizing, wire sizing, three way coil interpolation, mixed air and state point psychrometrics, fan curve and cost analysis, U-Factor calculations, natural gas pipe sizing, refrigeration line sizing, general pipe sizing, hot/chilled water pipe analysis and the quick look-up of common HVAC formulas and conversion factors. HVAC Tools is designed to be used as a quick utility for calculating these common tasks. Minimal input is required for each function and results are instantly displayed on the same screen as the input data. Some of the functions in HVAC Tools are also covered by other Elite programs. For example, duct sizing is done on a system wide basis for multiple duct sections at a time in Ductsize. The Tools program just sizes one duct at a time in order to minimize the data entry required. The same situation exists with psychrometrics, pipe sizing, and wire sizing. Elite has other programs you may want to consider that address those applications on a complete system basis. HVAC Tools is a simple and easy to use Windows programs designed for both engineers and contractors.
More details can be seen on HVAC Tools here https://www.elitesoft.com/web/hvacr/elite_htools_info.html and a functional demo of HVAC Tools can be downloaded from here https://www.elitesoft.com/web/prices/elite_order_info.html
