Evolis Primacy 1 | Installation

Discover how to quickly install your Evolis Primacy 1 card printer. 1. Connecting to the power supply Once you have unpacked the printer and its accessories from the box, connect the power cable to the power supply unit and plug the power cable connector into the printer. Next, plug the end of the power cable into an earthed power socket. The printer is powered on: the control panel lights up showing the printer is working properly. Under no circumstances should you connect the USB data cable before installation of the printer driver is complete. 2. Install the printer driver To install the printer driver, insert the 'Drivers, software & documentations' CD into your computer and select the print driver menu. A program will guide you through the entire installation process for the driver. 3. Connecting the printer to the computer Once the machine has been installed on the computer, connect the USB cable to the computer and printer. 4. Installation of the ribbon Open the printer cover and insert the ribbon. Close the cover and press until a click is heard. The ribbon positions itself automatically. 5. Installation of the cards Open the card feeder. If necessary, adjust the gauge lever from right to left depending on the thickness of the cards used, from 0.25 to 1.25 mm (10 to 50mil). Insert cards into the feeder (capacity: 100 cards maximum of thickness 0.76mm) Note that the cards are printed on the upper face. Close the feeder. 6. Printing a card Run a print, the printed cards are delivered to the output hopper (capacity of the hopper: 100 cards maximum of thickness 0.76mm). To remove the printed card, open the door of the output hopper. 00:00 Connecting to the power supply 00:18 Install the printer driver 00:34 Connecting the printer to the computer 00:42 Installation of the ribbon 00:43 Installation of the cards 01:14 Printing a card