Finally fixed the SR20DET starting issues (actually)
For those of you scavenging the internet to find the resolution to why your dang car wont start and you are too determined to find the solution to your issue, here it is in writing. This SR20 had both spark, and fuel, however was very tempermental in starting. I have a few videos of the hesitation issues it was having (https://www.youtube.com/watch?v=Za3hlUXps7c). Anyways here is what I did to fix it. I noticed that a ground was getting hot to touch so I went ahead and used a scotch-brite to clean the surfaces where the ground was connected, as well as all of the grounds in the car. I also added a ground from the motor to the chassis. Lastly I also traced down the starter signal wire from the fuse block and tested for 12v and continuity to the ecu. I found that the orange wire on the harness was spiced into the incorrect orange wire on the ecu (previous owners work). I made the correct fix, tested for 12v on ignition, and like magic it starts up first try for the first time in months. Instagram: https://www.instagram.com/darknissan/ @darknissan Drews IG @drewherrick Subscribe to the vlog for more builds and fun! Lots to come!!
Download
0 formatsNo download links available.