Foxwell GT60 Plus software display - Foxwelltool

foxwell GT60 Plus supports Full System, All Special Functions Available. All System Motion Tests, Programming Features Available. and Supports 15 Reset Functions, add more with Update https://www.foxwelltool.com/wholesale/gt60-plus-premier-diagnostic-platform-all-system-android.html foxwell GT60 Plus Coverage: • Support multiple vehicle makes • Compatible with the latest 2018/2019 models • Compatible with both OBDI and OBDII cars, SUVs, minivans, light-duty trucks sold worldwide 1. Full System Active Test Also known as Actuator Tests, are bi-directional diagnostic tests on vehicle systems and component. The tests let you to use the scanner temporarily activate or control a vehicle system or component, and when you exit the test, the system/component returns to normal operation. 2. Maintance Special Functions Oil Light Reset: allows you to reset the service lamps on the instrument cluster. EPB Service: allows you to perform the service and maintenance of brake systems, including deactivation and activation of the brake control system, bleeding brake fluid, opening and closing brake pads, and setting brakes after disc or pad replacement, on multiple brands of vehicles where electronic brake systems are fitted Battery Configuration: lets you to have new battery validated, clear faults from the dashboard and display current battery details of the vehicle DPF Regeneration: lets you perform the DPF cleaning to clear the blockage through continuous burning of the particulates captured in the DPF filter. TPS/TBA: Using the throttle position sensors in the throttle body, the ECU learns the full open and full closed positions through various states (idle, part throttle, WOT) known as a Throttle Body Alignment (TBA) SAS Calibration: lets you perform calibration of the Steering Angle Sensor, On successful calibration of the sensor, its fault memory is automatically cleared. CVT(Continuous Variable Transmission): used to reset the compensation code and initialize the ECT after a solenoid valve or valve body assembly has been replaced. Gear Learn: Crankshaft position sensor adaptive learning. TPMS Programming Service: allows you to check the tire sensor IDs from the vehicle ECU and to perform TPMS programming and reset after tires and/or TPM sensors are replaced and/or tires are rotated. Odometer: allows you to revise the date of odometer and write the original date into new odometer. Injector Coding: Write injector actual code or rewrite code in the ECU to the injector code of the corresponding cylinder so as to more accurately control or correct cylinder injection quantity. ABS Bleeding: to get a firm brake pad after air exhaustion. More than 15 Kinds of Service Reset Functions. Newly added A/F Adjust, Prime Fuel Pump Bleeding, Seat Match and CLUTH adaptation Functions. More Functions will be added...