Finally got around to building the PJ50
Some things to note;
Check the linkages and make sure you centre them in their neutral position. I had to wind the elevator push rods as far as they could go in and still ended up having to subtrim them back to the neutral position.
I have removed the stock nosewheel light. It was quite a warm LED and i wanted something closer to the full size so I swapped it out for another LED bulb.
I also installed recognition lights with the "Wig-Wag" function as the full size have.
These can be found at;
https://www.davesrce.com/navigation-lights
Thanks for watching and remember to subscribe.
