Full PA Operator Setup

This is a full walk through a Sunday morning, all the before, during and after service activities that the PA operator performs at a 10am Sunday service. This supplements the hands-on training you are given when starting out with the team, and covers the same material. For more details on many of the areas covered quite briefly in this video see some of the others, the most relevant ones are listed below. I also realised after making this that I didn't explain the PC/PC Main channels very well, and should have done. Those are covered in the Live Stream setup video starting here: https://www.youtube.com/watch?v=WsTh9L3-vZ0&t=261s Video Chapters - 00:00 - Introduction - 00:45 - 1. Setting up - 01:22 - Logging in - 01:50 - Scene Selection - 03:00 - Channels Explanation - 04:58 - Changing Channel Setup - 06:37 - Additional Equipment - 07:51 - Channel Processing - 09:59 - Channel Processing - HPF and EQ - 11:32 - Channel Processing - Compression - 12:01 - Library Presets - 13:51 - Finishing Setup Time - 14:36 - 2. Rehearsal Time - 15:02 - Setting Gain - 15:40 - Monitor Mixes - 18:46 - Tuning the Mix - 20:24 - Mix Priorities - 21:29 - Other Activities - 22:19 - Live Stream Preparation - 22:38 - Live Stream - Room Mics - 23:01 - Live Stream - Monitoring - 24:21 - Live Stream - Mix - 26:15 - Rehearsal Finishing Up - 28:20 - 3. During the Service - 30:53 - Live Stream - 32:27 - Handheld Mics - 33:36 - 4. After the Service - 34:34 - Saving Desk Changes - 35:32 - Powering Off - 35:54 - Wrapping Up Some other useful videos to watch after this: - Live Stream setup: https://youtu.be/WsTh9L3-vZ0 - Session 3: HPF and EQ: https://youtu.be/2-k2ngXkzEA - Session 4: FOH and Foldback Mixing: https://youtu.be/TW78xUiQd1g - Session 5: Using and Setting Up DCAs: https://youtu.be/cKIyFwc9FFE - Session 11: Desk Surface Setup: https://youtu.be/WF2gvmcoXzQ - Session 19: Mixes - Main, Auxes, and Groups: https://youtu.be/pdfnyV1Q9fw