2D Sketch : https://www.3dmechanism.com/post/3d-exercise-27
In this tutorial we'll use the features:
Revolve: Spins a 2D sketch around a center axis to create the main cylindrical body of your part.
Hole: Creates a precise engineering hole, often used in this sequence as a central bore for a shaft or a tapped set-screw hole on the collar.
Chamfer: Cuts away a sharp edge to create an angled bevel, typically used here to create a "lead-in" so a mating shaft or pin can easily slide into the hole.
Fillet: Rounds off the remaining sharp internal corners to relieve stress concentrations, or softens outer edges to make the part safe to handle.
---------------------------------------------------------------------------------------------
Rating, commenting, subscribing and sharing are always appreciated!!
----------------------------------------------------------------------------------------------
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Follow Us On:
Instagram : https://www.instagram.com/engbcruz/
YouTube: https://www.youtube.com/channel/UCzG_tEIt69-dFjtYTTo0tCA
#Education
#Fusion360
#Fusion360tutorial
#cad
