HOW TO: Bullet Casing Paracord Bracelet...Tutorial

I really enjoyed making this bracelet today, I've wanted to make one for a few weeks now, and finally found the time to make it. Be sure to comment if you have any questions. Me and my team work hard to reach everyone who comments, and to give the best of answers. *Information down below* Paracord Length: 7 FT of 550 paracord My Wrist Circumference: 6 1/4 Electrical Wire: I used a little over a Foot, but anywhere from 1-1/2 to 2 FT is plenty depending on your wrist circumference. Paracord Length 2x: 1-1/2 FT Of Gutted 550 Paracord cut in half. This was plenty, meaning my wire wasn't even 1-1/2 FT long...Tip, Scraps work perfect. Glue: I used a Hot Glue Gun, but if needed, you can use Super Glue for extra strength. Hot Glue is still mandatory though. Pliers: I used a pair of Dykes, and needle nose, but just needle nose are plenty. Shells: In this video I used Two Aluminum Bullet Casings. Brass works just as good if not better. :During The Intro, I forgot to mention at the end you will need Hemostats Or A Fid. If You Want To Watch Me and My Dad Ride BMX Be Sure To Check Out: @mobtownbmx1484 Discord Server: https://discord.gg/sXTj4Ds2