How To Install Threaded inserts
Stainless Steel Threaded Inserts made in Missouri
These can be used with all of these products; stoppers, openers, and can tab pulls. This is an original design from our manufacturer, they have a cap on the top so you don’t have to worry about glue getting into the threaded area. They are 5/8″ high with the 3/8″ x 16 tpi internal thread and use a 7/16″ drill bit. Always drill the hole 1/4″ – 3/16″ deeper to allow for air compression when installing the insert. The outer surface is rough and has ribs that will thread into the wood. *note: these inserts need to be glued in to prevent them from getting loose if the wood moves, which all wood will do.
Website
https://nilesbottlestoppers.com/
#nilesbottlestoppers
