How to make a clap switch using transistor

The clap switch circuit in the video is basically a two stage amplifier of CE-CC stage which then feeds the input of monostable multivibrator.Thus, the output stays in ON state for certain time dependent on capacitor and resistor values in monostable multivibrator part. Components used : - 2N2222(NPN) transistor *2 - Condenser mic - 10uF capacitor - 220uF capacitor - 470 ohm resistor - 1k ohm resistor - 10k ohm resistor - 100k ohm resistor - 1M ohm resistor - LED - Breadboard Any questions related to the topic are welcomed :) Background music link : https://youtu.be/fgXLNeSV42g