How to Program Your Foursevens Flashlight

Here's how to program your new Foursevens flashlight. Scroll down for more info. Foursevens Products: http://bit.ly/PL_47s Entering Configuration Mode: Just power cycle (on/off) the light 10 times in less than 3 seconds to enter configuration mode. The light will blink a number of times corresponding to the current configuration. One power cycle will change to the next configuration. Leave the light off for 5 seconds to save the current configuration to memory. When entering configuration mode you should use a "press" and not a "click." A button press will activate the light in momentary mode. A click is audible and latches the light in the "on" state. Basically clicking is too slow and pressing allows faster on/off cycling :) Config. 1: Max Config. 2: Max - Strobe Config. 3: Medium - High + Burst Config. 4: Low - Med - High + Burst Config. 5: High - Med - Low + Burst Config. 6: Low - Med - High - Strobe - SOS - Beacon + Burst Modes Low (Moonlight) = 1 lumen Medium = 15% High = 60% Max = 100% Burst = 100% (enter burst with 2 fast cycles from any mode) Strobe = 100% @ 20Hz Beacon = 100% double blink every 5 seconds About the maker: Before introducing Prometheus Lights to the world, founder Jason Hui designed watches, fly-fishing equipment, retail stores and machine tool accessories. He's built animatronic sharks for a Hollywood special effects studio, worked on the Automotive X Prize and the world’s first high-performance electric motorcycle at Mission Motors. “The world is full of stuff,” says Hui. “As a consumer, I want to buy things that I know someone has cared about and that I know will last. As a designer, maker and strategist, I strive to create products that reflect how I see the world, my values and they way I want to fit into the big picture." Website: https://darksucks.com/ Instagram: https://www.instagram.com/prometheuslights/ Facebook: https://www.facebook.com/prometheuslights/ Twitter: https://twitter.com/darksucks