How To Wire Surface Socket Quick Connect

Surface socket single 250V 10A - Quick Connect™ (WE) Here's a short video to show you how to terminate and fit surface quick connect, arguably the Fastest to Terminate surface quick connect in the world. To connect the 413QC surface sockets simply strip the outer sheath of the TPS cable, Insert into the coloured coded grooves, clamp down with a set of pliers until the hinged section locks into place - Test socket to Australian standards after connection - to be completed by a licensed electrician. Features Quick connect in line surface socket 3 pins 1 sq mm to 2.5 sq mm solid/stranded to AS/NZS5000 conductor range Terminate up to 2 sets of Active, Neutral & Earth conductors 240V 10A White Length 70mm Width 47mm Depth 46mm If this video helped you out please consider leaving a like & commenting down below if this works! Thank you so much :) WARNING: DO NOT ATTEMPT TO DIY ELECTRICAL WORK UNLESS BY LAW IT IS LEGAL IN YOUR STATE OR COUNTRY. All work is done at your own risk, information contained in these videos should not serve as professional advice without consulting a Registered Electrician, no responsibility or liability for loss, damage or injury is accepted on behalf of SparkyBaz YouTube channel. Videos are produced purely for educational use by Electrical Apprentices.