HVS-100/110 CG Wipe Tutorial

For-A Hanabi HVS-100 HVS-110 CG Wipe Tutorial Learn how to create a CG wipe with your HVS-100 or HVS-110. If you need to assistance on connecting to your HVS-100/110, please see our tutorial on "How To Access Your Web GUI." https://youtu.be/6j8r6dZCCFs If you have any questions or would like to see a specific tutorial, please email us at [email protected]. 00:00 Start. 00:14 Targa Sequence Requirements. 00:38 FileZilla setup. 00:55 FTP login connection. 01:15 Transferring your Targa sequence to your HVS-100/110. 01:33 CG Wipe Configuration. 01:45 Key1 setup. 02:00 Insert/Source menu configuration. 02:16 Still setup. 02:32 Still menu configuration. 02:44 CG Wipe setup. 02:52 CG Wipe menu. 03:00 CG Wipe menu configuration. 03:31 CG Wipe Keyer delay 03:51 CG Wipe delay, transition rate, and fader control settings. 04:28 Wipe setup. 04:39 Wipe menu configuration. Wipe rate and pattern type. 05:06 Running your CG Wipe. 05:19 Saving your CG Wipe for autoloading each time your switcher powers on. 05:36 USB drive requirements. 05:45 Still Store setup. 05:52 Still Store menu configuration page 1 and 2/7. 06:39 Still Store menu configuration page 3/7. 07:06 Soft reboot explanation. 07:15 Soft reboot procedure. 07:46 Soft reboot is required only once during the configuration of saving a new CG Wipe or Stills. Afterwards, hard power cycles are OK to do. 08:02 Running your CG Wipe after a system reboot. 08:05 Conclusion of this tutorial. 08:13 Email support at [email protected].