IC 9700 using SatPC32 and WSJT X

Please read below for the updated instructions since posting this video. How to configure the Icom IC-9700 to work with both SatPC32 and WSJT-X at the same time. This allows you to make contacts on satellites using FT4. The switch I used after wsjtx.exe is --rig-name=None Update 1: audio settings video for S.A.T. users. https://youtu.be/OQLk677rvfQ http://www.igatemini.com/sat - link to purchase. Update 2: You will want to change in the SatPC32 CAT menu the speed to at least x5 and maybe even x10. Make sure both the SSB/CW and FM/PKT intervals are 0. Click store under each of those options to save. !!!!!UPDATE 3 !!!!! Suggested frequencies. On RS-44 145.990 seems to be where the crowd has landed. From ANS-234 AMSAT News Service Weekly Bulletins 2021-08-21 FT4 activity is generally at the low end of the downlink passband on other linear satellites (5 kHz above the bottom passband limit), activity on AO-109 has been on a downlink frequency of 435.770 (5 kHz below transponder center) Special thanks to Bob N7ZO and Steve KC1MMC. Hope to catch you on the birds! 73 -Ant NU1U