Increase Range & Flight Time For Free - Long Range OSD

When flying long range FPV with a drone, one of the most important things to setup and test is the OSD. This is the pilots lifeline to a live feed of the drones telemetry data. All of the important information a drone pilot requires can be setup to be viewed as part of the OSD (on screen display) which is seen in the FPV goggles. Video about calibrating the current sensor in Betaflight: https://youtu.be/WcUwUDNmH9c I fly my own Long Range FPV frame designs. -Falcon RPM 7.5" Cinematic / Long Range @ AddictiveRC - https://bit.ly/Falcon_RPM_AddictiveRC -Falcon RPM 7.5" Cinematic / Long Range @ CNCDrones - https://bit.ly/FalconRPM - RAD Li-ion 7" Long Range - https://bit.ly/3MFoCdg - RAD Scout 7" Xtra Long Range - http://bit.ly/3kyvPDy - AOS Falcon 7 Cinematic Long Range - https://bit.ly/3jUiLUI Video Chapters: 00:00 - Introduction 00:54 - DJI OSD 01:45 - GPS telemetry 02:35 - Receiver telemetry 03:10 - Speed, current draw & efficiency 03:49 - mAh used, total distance, flight timer 04:20 - Cell voltage, throttle level, estimated flight time 05:12 - Making use of the information - Part 1 08:45 - Making use of the information - Part 2 10:02 - Making use of the information - Part 3 10:40 - Conclusion Consider supporting the channel on Patreon: https://www.patreon.com/user?u=48131636 Check out my frame design page @ CNCDrones: https://bit.ly/3vvRrD7 Use this link for the purchase of anything from GetFPV with no extra cost to you, but it helps the channel out: https://bit.ly/3roKZui