Installing a Duplex Switch - Leviton Decora Combination Switch

#ElectricalWiring #Leviton #Lutron #Eaton #Klientools #ElectricalSwitches #howto #DIY This video shows how I replaced an old combination switch with a new Leviton Decora Combination Switch. The adjoining Receptacle and this switch were on separate circuits. While working on this small project, I found that the old switch and the receptacle were not grounded. This wiring problem was corrected. I have tried to include all the steps involved in the project. I hope that the video is informative and helpful. If you like the video, please leave a Like, Comment and consider Subscribing to the channel. Thank You for Watching!! Affiliate Links: Black and Decker Screw Driver: https://amzn.to/46Q04cx Picquic Multi-bit Screw Driver: https://amzn.to/3yw18pB **Important Caution: The procedure shown in this video is for information, education and entertainment purposes only. If you are not comfortable working with electrical wiring or equipment, it is strongly recommended that you hire a licensed electrician. Working with electrical wiring or equipment can be dangerous and can cause serious injury, if not handled properly. Before undertaking any type of electrical work, always make sure that you follow your local electrical safety code.