Iris Rev. 5 Split Keyboard Build

The Iris Rev. 5 is the star of the show as well as its Stainless Steel plates as Danny walks you through a build video. Ready… set… solder! =============== --Keebio Build Links-- =============== https://keeb.io/ We just updated the website! Woohoo! 🥳 ✨ Make your very own Iris Rev. 5! https://keeb.io/collections/iris-split-ergonomic-keyboard/products/iris-rev-5-keyboard-pcbs-for-split-ergonomic-keyboard #keebio #splitkeyboards #irisrev5 #buildvideo #atutorialwithdanny =============== -- Materials Used -- =============== ►Iris Stainless Steel plates kit and PCB kit: https://keeb.io/products/iris-keyboard-case-plates-phoenix-edition ►Iris Rev. 5 PCB kit: https://keeb.io/products/iris-rev-5-keyboard-pcbs-for-split-ergonomic-keyboard ►USB-C to USB-A Cable for connecting to computer ►USB-C to USB-C Cable for connecting both halves: https://keeb.io/products/usb-c-to-usb-c-cable ►2u Cherry MX Stabilizers:​​ https://keeb.io/products/cherry-mx-stabilizer ►Rotary Encoder and Knobs: https://keeb.io/products/rotary-encoder-ec11, https://keeb.io/products/rotary-encoder-knob-ec11 ►MX-compatible switches, Alps, or Choc switches work with this Iris Rev.5 OR get us to pre-build it for you! ►https://keeb.io/products/iris-keyboard-pre-built If you’d like your personal switches used instead of the ones we offer, give us a holler and we can make it happen. ================= -- Recommendations -- ================= https://docs.keeb.io/soldering-tools https://docs.keeb.io/faq/keycaps https://docs.keeb.io/faq/switches ================ ---- Follow Us! ---- ================ Did you know Keebio has a newsletter? Sign up here: http://join.keeb.io Did you know we have a history of keyboards email series? http://cup.keeb.io Instagram: https://www.instagram.com/keebio/ Twitter: https://twitter.com/keebio ================ ---- Other builds! ---- ================ 👍 Our most popular video: https://www.youtube.com/watch?v=_egX7AGlI7c =============== ---- Chapters! ------- =============== 0:00 intro 0:35 Check plates for scratches and that holes line up 1:37 Check PCBs 2:02 Begin building 2:29 Insert switches 3:06 Insert switches into PCB 3:27 Solder in corner switches 5:53 Insert the rest of the switches 7:00 Solder all switches 9:42 Check all switches are straight and flush with top plate 10:00 Prep rotary encoder 11:03 Solder rotary encoder 11:58 Test your switches on a computer 12:17 Insert Screws & Standoffs 15:32 Add middle layer 15:42 Put the bottom plate on 17:26 Add soft bumpers if you like 17:58 Repeat for the other half Thank you so much for watching! See you in the next video! :)